Converting a carport into a garage is an easily manageable project assuming that the carport is in good shape. A Carport is an open structure and in order to convert a carport or completely enclose it, you will need to follow a few simple steps. In some areas, before converting carport, a person might need permit from their local authority. Here are few instructions on how to convert a carport into a garage.

The first important step is to analyze the carport. From one nook of the carport, about two foot intervals should be measured near the walls. In each interval, a 2×4 wall stud should be installed.

The next step is cutting the carport ceiling for about a length of 2×4 and start setting up the wall stud. The wall stud should be placed vertical at every interval on the wall. The upper part of the wall stud should be nailed in the roof and the lower part in the carport floor. This procedure should be continued until it completely covers the wall.

The next step is cutting the plywood sheets. The plywood sheets should be cut in proper length so that it fits the carport outside walls. The plywood sheets should be leaned on the wall and should be nailed properly on the wooden structure. To avoid gaps between plywood, join each plywood sheets with the other, and this procedure is continued until it covers the entire wall except the door.

Next step is deciding the garage door. For this, a person could take the help from the professionals and built the door for the new garage. Professional help is needed because some doors need crane like equipment to set up.

The final step is rolling the insulation material on the garage interior between the studs and stapling it on the right place. Then, it’s up to the taste of a person to paint a wall, or hang dry wall, or leave as it is. These simple instructions will surely guide a person to convert carport into garage.

Related posts:

1. Converting Carport
2. Converting a Carport
3. Carport Doors
4. Carport Walls
5. Carport Enclosure
6. Carport Gate